Forum
Important Notice for New User Registrations
To combat an increasing number of spam and bot registrations, we now manually approve all new user registrations. While this may cause a delay until your account is approved, this step is essential to ensure the quality and security of this forum.
To help us verify your registration as legitimate, please use a clear name as user name or an official email address (such as a work, university, or similar address). If you’re concerned that we may not recognize your registration as non-spam, feel free to email us at with a request to approve your username.
using Qblade for boat sail computing
Quote from rahati on 24. October 2026, 00:54good morning
I started using Qblade whilst attempting to simulate 2D flow around a boat’s sail. My programme is designed to calculate the boat’s propulsive force based on the wind speed. The sail is assumed to be rigid, although in reality it is elastic. I have considered several camber profiles for the sail, which is assumed to be symmetrical. The sail has a very small thickness, but it is not zero. I drew the cross-section of the sail and then extracted points from the lower and upper surfaces to import them into Qblade. Here is what I ended up with.
what do you think about method???
good morning
I started using Qblade whilst attempting to simulate 2D flow around a boat’s sail. My programme is designed to calculate the boat’s propulsive force based on the wind speed. The sail is assumed to be rigid, although in reality it is elastic. I have considered several camber profiles for the sail, which is assumed to be symmetrical. The sail has a very small thickness, but it is not zero. I drew the cross-section of the sail and then extracted points from the lower and upper surfaces to import them into Qblade. Here is what I ended up with.
what do you think about method???
Uploaded files:
- You need to login to have access to uploads.
Quote from David on 27. October 2026, 12:06Hi,
I think this is a reasonable approach for an initial comparison of different sail profiles using XFoil.
However, treating the sail as rigid is only valid if the geometry represents its actual shape under aerodynamic loading. In reality, the sail deforms depending on wind speed, direction and trim, which significantly affects its aerodynamic performance.
Best regards,
David
Hi,
I think this is a reasonable approach for an initial comparison of different sail profiles using XFoil.
However, treating the sail as rigid is only valid if the geometry represents its actual shape under aerodynamic loading. In reality, the sail deforms depending on wind speed, direction and trim, which significantly affects its aerodynamic performance.
Best regards,
David
Quote from rahati on 27. October 2026, 14:09Thank you for your comment. That is precisely what I am currently doing: working on rigid wing designs. The aim is to provide solutions for potential sail propulsion for large cargo ships. These rigid wings are designed to be removable and are made from PVRT. Best regards
Thank you for your comment. That is precisely what I am currently doing: working on rigid wing designs. The aim is to provide solutions for potential sail propulsion for large cargo ships. These rigid wings are designed to be removable and are made from PVRT. Best regards


